features ultra compact, low profile plastic casing fully encapsulated (pollution/dust) single-, dual- and triple output models 2 p ackage v ersions: - screw terminal block for chassis mount - solder pins for direct pcb mount din-rail mount adaptor (optional) universal input 85-264 vac, 47-440 hz protection class ll iec/en/ul 60950-1 approval, cb-report over-temperature protection protection against short circuit and oveload 3-year product warranty the tmp & tmpm series ac/dc power modules is a new range of fully encapsu - lated power supplies in an ultra-compact casing. they feature easy chassis mount - ing with screw terminal block connection or direct pcb mounting with solder pins. full compliance with international safety standards for industrial control equipment qualifes the products for worldwide markets. these power supplies offer a cost effective solution for many space critical applica - tions in commercial and industrial electronic equipment and for polluted and dusty environment. ac/dc power modules tmp & tmpm series, 4 to 60 watt page 1 of 9 15 to 60 watt and multi output models see next page --> cb scheme ul 50 8 ul 60 95 0- 1 o rder code output power max. output effciency pcb-mount with solder pins typ. tmpm 04103 3.3 vdc / 1200 ma 70 % tmpm 04105 5.0 vdc / 800 ma 72 % tmpm 04109 9.0 vdc / 444 ma 75 % tmpm 04112 4 w 12 vdc / 333 ma 76 % tmpm 04115 15 vdc / 267 ma 76 % tmpm 04124 24 vdc / 167 ma 77 % tmp 07103 4.6 w 3.3 vdc / 1400 ma 70 % tmp 07105 5.0 vdc / 1400 ma 73 % tmp 07112 7 w 12 vdc / 583 ma 78 % tmp 07115 15 vdc / 466 ma 78 % tmp 07124 24 vdc / 291 ma 78 % tmpm 10103 8.3 w 3.3 vdc / 2500 ma 70 % tmpm 10105 5.0 vdc / 2000 ma 72 % tmpm 10112 10 w 12 vdc / 833 ma 76 % tmpm 10115 15 vdc / 667 ma 75 % tmpm 10124 24 vdc / 417 ma 72 % tmp 10103 6.6 w 3.3 vdc / 2000 ma 70 % tmp 10105 5.0 vdc / 2000 ma 73 % tmp 10112 10 w 12 vdc / 833 ma 76 % tmp 10115 15 vdc / 666 ma 76 % tmp 10124 24 vdc / 416 ma 76 % single output models 4 to 10 watt small footprint low profle http://www.tracopower.com
ac/dc power modules tmp & tmpm series 4 to 60 watt page 2 of 9 order code output power max. output effciency pcb-mount with solder pins chassis mount, screw terminal typ. tmp 15105 tmp 15105c 5 vdc / 3000 ma 75 % tmp 15112 tmp 15112c 12 vdc / 1250 ma 79 % tmp 15115 tmp 15115c 15 w 15 vdc / 1000 ma 79 % tmp 15124 tmp 15124c 24 vdc / 625 ma 79 % tmp 15148 tmp 15148c 48 vdc / 310 ma 79 % tmp 30105 tmp 30105c 5 vdc / 6000 ma 78 % tmp 30112 tmp 30112c 12 vdc / 2500 ma 80 % tmp 30115 tmp 30115c 30 w 15 vdc / 2000 ma 80 % tmp 30124 tmp 30124c 24 vdc / 1250 ma 80 % tmp 30148 tmp 30148c 48 vdc / 625 ma 80 % tmp 60105 tmp 60105c 51 w 5.1 vdc / 10000 ma 79 % tmp 60112 tmp 60112c 12 vdc / 5000 ma 82 % tmp 60115 tmp 60115c 15 vdc / 4000 ma 83 % tmp 60124 tmp 60124c 60 w 24 vdc / 2500 ma 84 % tmp 60136 tmp 60136c 36 vdc / 1665 ma 84 % tmp 60148 tmp 60148c 48 vdc / 1250 ma 84 % single output models 15 to 60 watt peak current, total power not to exceede 30 watt: 1) 133 % 2) 150 % 3) 200 % order code output output 1 output 2 output 3 eff. pcb-mount chassis mount power typ. models with common ground tmpm 04212 +12 vdc / 166 ma C12 vdc / 166 ma 77 % tmpm 04215 4 w +15 vdc / 133 ma C15 vdc / 133 ma 77 % tmpm 04253 +5.0 vdc / 600 ma +3.3 vdc / 150 ma 72 % tmpm 04225 +12 vdc / 250 ma +5.0 vdc / 120 ma 75 % tmp 10212 10 w +12 vdc / 380 ma C12 vdc / 380 ma 77 % tmp 10215 +15 vdc / 300 ma C15 vdc / 300 ma 77 % tmp 15212 tmp 15212c 15 w +12 vdc / 650 ma C12 vdc / 650 ma 79 % tmp 15215 tmp 15215c +15 vdc / 500 ma C15 vdc / 500 ma 79 % tmp 30212 tmp 30212c 30 w +12 vdc / 1300 ma C12 vdc / 1300 ma 80 % tmp 30215 tmp 30215c +15 vdc / 1000 ma C15 vdc / 1000 ma 80 % models with output 1 isolated from output 2/3 (floating) tmp 15252 tmp 15252c 5.0 vdc / 1500 ma 12 vdc / 625 ma 72 % tmp 15512 tmp 15512c 15 w 5.0 vdc / 2000 ma +12 vdc / 200 ma C12 vdc / 200 ma 74 % tmp 15515 tmp 15515c 5.0 vdc / 2000 ma +15 vdc / 150 ma C15 vdc / 150 ma 74 % tmp 30252 tmp 30252c 5.0 vdc / 3000 ma 2) 12 vdc /1250 ma 2) 76 % tmp 30512 tmp 30512c 5.0 vdc / 3000 ma 2) +12 vdc / 600 ma 2) C12 vdc / 600 ma 2) 76 % tmp 30515 tmp 30515c 30 w 5.0 vdc / 3000 ma 2) +15 vdc / 500 ma 2) C15 vdc / 500 ma 2) 76 % tmp 30522 tmp 30522c 5.0 vdc / 3000 ma 2) +12 vdc / 1000 ma 2) C12 vdc / 250 ma 3) 76 % tmp 30316 tmp 30316c 3.3 vdc / 4000 ma 1) +5.0 vdc / 1500 ma 1) +12 vdc / 250 ma 3) 71 % tmp 30317 tmp 30317c 5.0 vdc / 4500 ma 1) +3.3 vdc / 1000 ma 2) +12 vdc / 250 ma 3) 71 % multi output models 4 to 30 watt http://www.tracopower.com
ac/dc power modules tmp & tmpm series 4 to 60 watt page 3 of 9 all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. max. capacitive load [f] model series output: tmpm 04 tmp 07 tmpm 10 tmp 10 tmp 15 tmp 30 tmp 60 single output models: 3.3 vdc 1200 2200 2200 3900 - - - 5.0 / 5.1 vdc 800 2200 2200 3300 3900 8000 8000 9.0 vdc 440 - - - - - - 12 / 15 vdc 260 1000 1000 2200 2200 3900 3900 24 vdc 160 680 680 1000 1000 1500 1500 36 vdc - - - - - - 1000 48 vdc - - - - 680 1000 800 dual output models: 3.3 / 5.0 vdc 4700 - - - 2000 3900 - +12 / C12 / +15 / C15 vdc 260 - - 1000 1500 1500 - t riple output models: 3.3 / 5.0 vdc - - - - 2200 2200 - +12 / C12 / +15 / C15 vdc - - - - 1500 1500 - input specifications input voltage C nominal 100 C 240 vac C ac range (universal input) 85 C 264 vac C dc range 120 C 370 vdc input frequency C nominal 50 / 60 hz C range 4 C 30 w models: 47 C 440 hz 60 w models: 47 C 63 hz input current at full load C 115 vac / 230 vac input 4 w models: 80 ma / 55 ma typ. 7 w models: 150 ma / 100 ma typ. 10 w models: 200 ma / 130 ma typ. 15 w models: 300 ma / 190 ma typ. 30 w models: 550 ma / 330 ma typ. 60 w models: 1050 ma / 670 ma typ. external input fuse required (recommended value) 4 w models: 1.0 a slow blow 7 C 15 w models: 2.0 a slow blow 30 w models: 3.5 a slow blow 60 w models: 6.3 a slow blow output specifications voltage set accuracy 2 % max. regulation C input variation output 1 1 % max. C input variation output 2/3 3 % max. C load variation tmpm 04103 model (0C100%): 1.5 % max. single and floating outputs (10C100%): 1 % max. (0C100% for tmpm 04 models) common ground outputs balanced load (10C100%): 2.5 % max. common ground outputs unbalanced load (20/90%): 5.0 % max. minimum load tmpm 04 single and sym.dual models: not required tmpm 04 asym. dual models: 25% per output single and dual output models: 10 % of rated max. current triple output models main output: 10 % of rated max. current triple output models auxiliary outputs: 20 % of rated max. current operation at lower load condition will not damage these power supplies, how ever, they may not meet all listed specifications. ripple and noise (20mhz bandwidth) 3.3 vdc & 5.0 vdc outputs: 1.8 % of vout [mvp-p] other outputs: 1.0 % of vout [mvp-p] overload protection by current limit 105 % min. of inom, fold back, automatic recovery (long term overload condition may cause damage to the power supply) overvoltage protection by zehner diode (main output only) 120 % of vout typ. start-up time 400 ms typ. hold-up time 20 ms typ. http://www.tracopower.com
page 4 of 9 ac/dc power modules tmp & tmpm series 4 to 60 watt all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. general specifications temperature ranges C operating tmpm 04 models: C25c to +60c (no derating) tmp 10 models: C25c to +50c (no derating) other models: C25c to +70c (with derating) C storage (non-operating) C40c to +85c power derating 3.3 %/k above +50c to +65c 5.0 %/k above +65c to +70c (no derating aproved for tmpm04 and tmp10 models) over temperature protection at 90c (automatic recovery at 67c) temperature coefficient 0.02 %/k humidity (non-condensing) 95 % rel. h max. switching frequency 100 khz typ. fixed isolation v oltage (60 sec.) C input/output 3000 vac isolation resistance C input/output 100 mohm (at 500 vdc) altitude during operation tmp 10, tmpm 04 & 10, : 2000 m max. ( 6560 f t ) approved other models: 3000 m max. (9840 ft) approved electromagnetic compatibility (emc), emissions en 61000-6-3: 2007 en 61204-3: 2000, class a en 55022, level b, fcc part 15 level b electromagnetic compatibility (emc), immunity en 61000-6-2: 2005 en 61204-3: 2000, class a C electrostatic discharge esd en 61000-4-2 8 kv / 4 kv, criteria b C rf field susceptibility en 61000-4-3 10 v/m, criteria a C electrical fast transient / burst immunity input en 61000-4-4 2 kv, criteria b C electrical fast transient / burst immunity output en 61000-4-4 2 kv, criteria b C surge immunity line C neutral en 61000-4-5, 1 kv, criteria b C surge immunity output en 61000-4-5 0.5 kv, criteria b C immunity to conducted rf disturbances en 61000-4-6 10 v, criteria b C mains voltage dips and interruptions en 61000-4-11 30 % 10 ms, criteria b 60 % 100 ms, criteria c 95 % 5000 ms, criteria c emc test certificates www.tracopower.com/products/tmp-emc.pdf protection class ii to iec/en 60536 safety standards C information technology equipment iec/en 60950-1, ul 60950-1 C industrial control equipment ul/cul 508 (chassis mount single and symetric dual output models only) safety approvals C cb certificate for iec 60950-1 tmpm 04 models: www.tracopower.com/products/tmpm04-cb.pdf tmp 07 models: www.tracopower.com/products/tmp07-cb.pdf tmp 10 models: www.tracopower.com/products/tmp10-cb.pdf tmpm 10 models: www.tracopower.com/products/tmpm10-cb.pdf tmp 15 models: www.tracopower.com/products/tmp15-cb.pdf tmp 30 single output models: www.tracopower.com/products/tmp30-cb.pdf tmp 30 dual / triple output models: www.tracopower.com/products/tmp30-cb2.pdf tmp 60 models: www.tracopower.com/products/tmp60-cb.pdf C ul approvals for ul 60950-1 www.ul.com -> certifications -> file: e188913 C ul approval for ul 508 (chassis mount models only) www.ul.com -> certifications -> file: e322109 reliability /calculated mtbf tmp 07, tmpm 04 & 10 models: >330000 h (mil-hdbk-217f, at +25c, ground benign) tmp 10 models: >300000 h tmp 15 models: >280000 h tmp 30 models: >250000 h tmp 60 models: >125000 h casing material plastic resin + fiberglass (ul 94v-0 rated ) environmental compliance C reach www.tracopower.com/products/tmp-reach.pdf C rohs rohs directive 2011/65/eu http://www.tracopower.com
page 5 of 9 ac/dc power modules tmp & tmpm series 4 to 60 watt outline dimensions pin diameter: 1.0 (0.04) tmp 07 models: tmp 10 models: weight: 44 g (1.55 oz) dimensions in [mm], ( ) = inches case tolerances: 0.5 (0.02) pin pich tolerance: 0.25 (0.01) 19.3 0.5 6.0 5.0 (0.02) (0.24) (0.76) (0.20) 5.0 (0.20) 1 2 4 3 10.16 25.4 20.32 2.54 45.72 50.80 (0.40) (1.00) (0.80) (0.10) bottom view (1.80) (2.00) 2.54 (0.10) pin single 1 ac (n) 2 ac (l) 3 +vout 4 Cvout pinout 1 2 4 3 5 10.16 10.16 45.0 17.78 19.0 0.5 6.0 54.0 64.0 5.0 (0.40) (0.40) (1.77) (0.70) (0.02) (0.24) (0.75) (0.20) 5.0 (0.20) bottom view (2.13) (2.52) 4.0 (0.16) 22.5 (0.89) pin single dual 1 ac (n) ac (n) 2 ac (l) ac (l) 3 Cvout vout 2 4 ntc com.1/2 5 +vout vout 1 pinout pin diameter: 1.0 (0.04) weight: 92 g (3.25 oz) (ntc = not to connect) tmpm 10 models: 23.5 0.7 10.0 5.0 (0.03) (0.39) (0.93) (0.20) 5.0 (0.20) 1 2 4 3 10.16 27.2 20.32 3.45 45.72 52.4 (0.40) (1.07) (0.80) (0.14) bottom view (1.80) (2.06) 3.35 (0.13) pin single 1 ac (n) 2 ac (l) 3 +vout 4 Cvout pinout pin diameter: 1.0 (0.04) weight: 54 g (1.90 oz) 7.50 (0.30) bottom view 14.00 (0.55) 2x 3.75 (2x0.15) 3.75 (0.15) 36.5 (1.44) 27.0 (1.06) 21.00 (0.83) 3.00 (0.12) 7.50 (0.30) 25.25 (0.99) 17.1 (0.67) 4.0 (0.16) 1 23 4 5 6 7 tmpm 04 models: pin diameter: 0.5 (0.02) weight: 26 g (0.92 oz) pin single dual 1 ntc 2 ntc 3 +vout vout 1 4 Cvout com.1/2 5 ntc vout 2 6 ac (n) 7 ac (l) pinout (ntc = not to connect) http://www.tracopower.com
page 6 of 9 ac/dc power modules tmp & tmpm series 4 to 60 watt outline dimensions tmp 15 models for pcb mount: tmp 15 models for chassis mount: dimensions in [mm], ( ) = inches case tolerances: 0.5 (0.02) pin pich tolerance: 0.25 (0.01) mounting hole tolerance: 0.25 (0.02) 1 2 5 4 6 11.43 54.0 20.32 62.0 74.0 (0.45) (2.13) (0.80) bottom view (2.44) (2.91) 3 8.89 (0.35) 7 27.0 (1.06) 11.43 (0.45) 8.89 (0.35) 2 x m4 th d 19.9 (0.78) 19.9 (0.78) 40.0 (1.57) 6.0 (0.24) 19.3 0.5 6.0 5.0 (0.02) (0.24) (0.76) (0.20) 5.0 (0.20) pin single dual sym. dual asym. triple 1 ac (n) 2 ac (l) 3 no pin vout 3 4 Cvout vout 2 Cvout 2 com.2/3 5 no pin com.1/2 +vout 2 vout 2 6 +vout vout 1 Cvout 1 Cvout 1 7 no pin +vout 1 +vout 1 pin-out 5 46 37 1 2 t op view 86.0 96.0 (3.39) (3.78) 5.0 (0.20) 54.0 (2.13) 4.0 (0.16) 46.0 (1.81) 76.0 (2.99) 10.0 (0.39) 23.3 (0.92) 5.0 (0.20 11.8 (0.46) 4 x ?3.5 pin single dual sym. dual asym. triple 1 ac (n) 2 ac (l) 3 ntc vout 3 4 Cvout vout 2 Cvout 2 com.2/3 5 ntc com.1/2 +vout 2 vout 2 6 +vout vout 1 Cvout 1 Cvout 1 7 ntc +vout 1 +vout 1 connection (ntc = not to connect) pin diameter: 1.0 (0.04) weight: 114 g (4.02 oz) weight: 162 g (5.71 oz) max screw penetration: 5.5 (0.21) http://www.tracopower.com
page 7 of 9 ac/dc power modules tmp & tmpm series 4 to 60 watt outline dimensions tmp 30 models for pcb mount: 1 2 5 4 6 63.5 31.75 81.3 88.9 (2.50) (1.25) bottom view (3.20) (3.50) 3 7 27.94 (1.10) 12.70 (0.50) 15.24 (0.60) 2 x m4 th d 27.5 (1.08) 3.8 (0.15) 5.0 (0.20) 27.65 (1.09) 12.70 (0.50) 15.24 (0.60) 27.94 (1.10) 21.5 0.5 6.0 5.0 (0.02) (0.24) (0.85) (0.20) 5.0 (0.20) pin single dual sym. dual asym. triple 1 ac (n) 2 ac (l) 3 +vout vout 1 +vout 2 vout 2 4 no pin / ntc +vout 1 +vout 1 5 Cvout com.1/2 Cvout 2 com 2/3 6 no pin / ntc Cvout 1 Cvout 1 7 ntc vout 2 ntc vout 3 pinout / connection (ntc = not to connect) dimensions in [mm], ( ) = inches case tolerances: 0.5 (0.02) pin pich tolerance: 0.25 (0.01) mounting hole tolerance: 0.25 (0.02) pin diameter: 1.0 (0.04) weight: 177 g (6.24 oz) tmp 30 models for chassis mount: weight: 191 g (6.74 oz) 5 46 37 1 2 t op view 100.0 112.0 (3.94) (4.41) 6.0 (0.24) 63.8 (2.51) 6.9 (0.27) 50.0 (1.97) 4 x ?3.5 92.0 (3.62) 10.0 (0.39) 25.6 (1.01) 5.0 (0.20) 11.8 (0.46) max screw penetration: 5.5 (0.21) http://www.tracopower.com
page 8 of 9 ac/dc power modules tmp & tmpm series 4 to 60 watt outline dimensions tmp 60 models for chassis mount: (ntc = not to connect) dimensions in [mm], ( ) = inches case tolerances: 0.5 (0.02) mounting hole tolerance: 0.25 (0.02) weight: 357 g (12.95 oz) pin single 1 ac (n) 2 ac (l) 3 ntc 4 +vout 5 ntc 6 Cvout 7 ntc connection 5 46 37 1 2 t op view 100.0 112.0 (3.94) (4.41) 6.0 (0.24) 67.8 (2.67) 8.9 (0.35) 50.0 (1.97) 4 x ?3.5 92.0 (3.62) 10.0 (0.39) 38.0 (1.50) 5.0 (0.20) 11.8 (0.46) tmp 60 models for pcb mount: 1 2 4 6 67.5 33.75 81.3 89.0 (2.66) (1.33) bottom view (3.20) (3.50) 3 7 27.94 (1.10) 12.70 (0.50) 15.24 (0.60) 2 x m4 th d 27.5 (1.08) 3.85 (0.15) 5.55 (0.219) 27.05 (1.065) 12.70 (0.50) 15.24 (0.60) 27.94 (1.10) 34.0 0.5 6.0 5.0 (0.02) (0.24) (1.34) (0.20) 5.0 (0.20) weight: 345 g (12.17 oz) pin diameter: 2.0 (0.08) pin single 1 ac (n) 2 ac (l) 3 no pin 4 +vout 6 Cvout 7 no pin pinout max screw penetration: 5.5 (0.21) http://www.tracopower.com
sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com page 9 of 9 ac/dc power modules tmp & tmpm series 4 to 60 watt din-rail mounting kit order code for models tmp-mk1 tmp 15xxxc tmp-mk2 tmp 30xxxc & tmp 60xxxc din-rail mounting kit adapter for mounting on din-rails as per en 50022-35 (snap-on mounting) specifcations can be changed any time without notice. kit contains interface plate, din-rail clip and necessary screws. rev. june 19. 2013
|
